How to Change a Flat Tire in Lisle, IL
Getting a flat tire on your Chevrolet model can be frustrating since it delays your ability to reach your destination in Lisle, IL. However, using this guide prepared by our Service Department at Bill Kay Chevrolet, you can be back on the road in just a few minutes. Learn which tools you need to change a damaged tire and when to call for aid.
Stock the Correct Tools
Preparedness is the first step required to swap a flat tire for a spare one. You must bring the correct tools and components along on your journeys to be prepared for the possibility that a pothole suddenly halts your travels on Route 34. In your trunk or another storage space, you’ll need to bring along a car jack, a spare tire, and a lug wrench. You should also have your car’s Owner’s Manual with you to see the proper place to set the jack under your Chevrolet Tahoe, Malibu, or Silverado 1500. Other helpful items to bring on your journeys include a portable tire inflator, wheel wedges to stop the car from rolling, and a high-visibility vest. It’s not enough to just put these parts in your vehicle, though. Check their condition every month to ensure the spare has the correct tire pressure and the tools are still functional.
Starting to Change the Flat Tire
As soon as you realize your car’s tire is going flat, you need to begin an assessment. Start looking at your surroundings to see if you’re in a place where you can securely change the tire. Usually, that involves finding a well-lit, less-traveled area like Candlewood Park. If you’re stuck on the side of a busy road, it may be better to have your vehicle towed to our convenient location or have Roadside Assistance help you. Assuming you have a safe place, begin by taking out your supplies listed above. Using the lug wrench, loosen the lug nuts on the damaged tire about half a turn. Next, use the location suggested in your Owner’s Manual to place the jack. Remove the lug nuts the rest of the way using the lug wrench, and then take off the damaged tire.
Finishing the Procedure
Set aside the flat tire and bring your spare tire over to the vehicle. Inspect it one more time to ensure it is in the proper condition to support your Chevrolet model. Mount the tire on the wheel assembly and then hand-tighten the lug nuts. At this point, you should use the tire jack to lower the vehicle until the rubber is touching the road surface but not completely resting on it. Then, use the lug wrench to tighten the lug nuts in a star-shaped pattern by skipping over every other item until they’re all secure. That will ensure that the tire goes on straight. Finally, lower the vehicle the rest of the way and attempt to turn the lug nuts a bit more. Stow all your items and continue your journey. Remember that a donut spare should only be traveled on for about 50 miles at speeds that don’t exceed 50 MPH. If you need to shop for a new set, use our Tire Finder to get the process done quickly. We can even mount them for you!
